14/16
Endress+Hauser
Kits CM42
Beschreibung Menge/Qty. Pos. Description
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Kabelverschraubung G ½" PA reduz. 1 St./pc. 10 Cable gland G ½" PA reduced grey
Kabelverschraubung G ½" PA grau 1 St./pc. 10a Cable gland G ½" PA grey
Gegenmutter G ½" PA grau 2 St./pcs. 11 Lock nut G ½" PA grey
Flachdichtring ID20 AD24 mm PE 2 St./pcs. 12 Flat seal ID20 OD24 mm PE
Blindstopfen PG13,5/M20 schwarz 2 St./pcs. 13 Blind plug PG13.5/M20 black
Kabelverschraubung G
3
/
8
" PA grau 1 St./pc. 20 Cable gland G
3
/
8
" PA grey
Gegenmutter G
3
/
8
" PA grau 1 St./pc. 21 Lock nut G
3
/
8
" PA grey
Flachdichtring ID16 AD21 mm PE 1 St./pc. 22 Flat seal ID16 OD21 mm PE
Blindstopfen NPT
3
/
8
" / PG9 schwarz 1 St./pc. 23 Blind plug NPT
3
/
8
" / PG9 black
Verschlussschraube M201,5 PA sw 3 St./pcs. 30 Screw plug M201,5 PA black
Gegenmutter M201,5 PA grau 3 St./pcs. 31 Lock nut M201.5 PA grey
O-Ring ID17 W2,2 mm EPDM 3 St./pcs. 32 O-ring ID17 W2.2 mm EPDM
Verschlussschraube M161,5 PA sw 1 St./pc. 40 Screw plug M161.5 PA black
Gegenmutter M161,5 PA grau 1 St./pc. 41 Lock nut M161.5 PA grey
O-Ring ID13 W2,2 mm EPDM 1 St./pc. 42 O-ring ID13 W2.2 mm EPDM
Anleitung für Servicekit 1 St./pc. -- Service kit instruction
8.5 71426655 Kit CM42:
Verschraubungen G ½" SS
Dieses Kit enthält folgende Teile (siehe Bild 12):
8.5 71426655 Kit CM42:
Cable glands G ½" SS
This kit contains following parts (see figure 12):
Bild 12:
Kit Verschraubungen G ½"
für CM42 Edelstahlgehäuse
Figure 12:
Kit cable glands G ½"
for CM42 stainless steel enclosure
10
10a
20
30
32
13
40
31
11
11
21
12
22
13
23
42
41
12
30 30
31
31
32
32