Endress+Hauser Micropilot FMR10 - 2 Basic safety instructions; 2.1 Requirements for personnel; 2.2 Designated use

Micropilot FMR10
8 Endress+Hauser
Signal on alarm
Depending on the interface, failure information is displayed as follows:
• Current output
Alarm current: 22.5 mA (in accordance with NAMUR recommendation NE 43)
• SmartBlue (app)
• Status signal (as per NAMUR Recommendation NE 107)
• Plain text display with remedial action
Linearization
The linearization function of the device allows the conversion of the measured value into any unit of
length, weight, flow or volume.
When operating via SmartBlue (app), up to 32 value pairs can be entered manually into the
linearization table.