Endress+Hauser Micropilot FMR10 - Installation; Installation Conditions

Micropilot FMR10
12 Endress+Hauser
Installation
Installation conditions Installation types
B
C
A
E
F
D
A0028892
 6 Wall, ceiling or nozzle installation
A Wall or ceiling mount, adjustable
B Mounted at front thread
C Mounted at rear thread
D Ceiling installation with counter nut (included in delivery)
E Horizontal installation in confined spaces (sewer shaft)
F Shaft wall mounting
Caution!
• The sensor cables are not designed as supporting cables. Do not use them for suspension
purposes.
• Always operate the device in a vertical position in free-space applications.
Nozzle mounting
The antenna should project out of the nozzle for optimum measurement. The interior of the nozzle
must be smooth and may not contain any edges or welded joints. The edge of the nozzle should be
rounded if possible.
L
D
L
D
A0028843
 7 Nozzle mounting
L Nozzle length
D Nozzle diameter
The maximum length of the nozzle L depends on the nozzle diameter D.
Please note the limits for the diameter and length of the nozzle.