Endress+Hauser Micropilot FMR10 - Page 16

Installation Micropilot FMR10
16 Endress+Hauser
40 mm (1.5 in) antenna, α 30 °
W = D × 0.54
40 mm (1.5 in) antenna with flooding protection tube, α 12 °
W = D × 0.21
5.1.6 Measurement in plastic vessels
3
1
2
A0029540
 8 Measurement in a plastic vessel with a metallic, interfering installation outside of the vessel
1 Pipe, tubing
2 Ladder
3 Grate, railing
If the outer wall of the vessel is made of a non-conductive material (e.g. GFR), microwaves can
also be reflected by interfering installations outside of the vessel.
Please ensure there are no interfering installations made of a conductive material in the
signal beam (see the beam angle section for information on calculating the beamwidth
diameter).
Please contact the manufacturer for further information.