Micropilot FMR10 Installation
Endress+Hauser 17
5.1.7 Protective hood
For outdoor use, a protective hood is recommended.
The protective hood can be ordered as an accessory or together with the device via the product
structure "Accessory enclosed".
A0031277
9 Protective hood, e.g. with 40 mm (1.5") antenna
The sensor is not completely covered by the protective hood.
5.1.8 Use of flooding protection tube
The flooding protection tube ensures the sensor measures the maximum level even if it is
completely flooded.
In free-field installations and/or in applications where there is a risk of flooding, the flooding
protection tube must be used.
The flooding protection tube can be ordered as an accessory or together with the device via
the product structure "Accessory enclosed".
To Next Page
Loading...
