Installation Micropilot FMR10
18 Endress+Hauser
A0030394
10 Function of flooding protection tube
1 Air pocket
2 O-ring (EPDM) seal
3 Blocking distance
4 Max. level
The tube is screwed directly onto the sensor and seals off the system by means of an O-ring
making it air-tight. In the event of flooding, the air pocket that forms in the tube ensures the
measurement of the maximum level at the end of the tube. Due to the fact that the Blocking
distance is inside the tube, multiple echoes are not analyzed.
5.1.9 Installation with mounting bracket, adjustable
The mounting bracket is available as an accessory.
To Next Page
Loading...
