XA01555F-A Micropilot FMR60, FMR62, FMR67
16 Endress+Hauser
Associated documentation
This document is an integral part of the following Operating Instructions:
• BA01618F/00 (FMR60)
• BA01619F/00 (FMR62)
• BA01620F/00 (FMR67)
Supplementary
documentation
Explosion-protection brochure: CP00021Z/11
The Explosion-protection brochure is available:
• In the download area of the Endress+Hauser website: www.endress.com -> Download ->
Advanced -> Documentation Code: CP00021Z
• On the CD for devices with CD-based documentation
Manufacturer's certificates EU Declaration of Conformity
→ 3
EU type-examination certificate
Certificate number:
IBExU16ATEX1194 X
List of applied standards: See EU Declaration of Conformity.
IEC Declaration of Conformity
Certificate number:
IECEx IBE16.0035 X
Affixing the certificate number certifies conformity with the following standards (depending on the
device version):
• IEC 60079-0 : 2011
• IEC 60079-11 : 2011
• IEC 60079-26 : 2014
• IEC 60079-31 : 2013
Manufacturer address
Endress+Hauser Maulburg GmbH+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
Phone: +49 7622 28-0
Address of the manufacturing plant: See nameplate.
Other standards
Among other things, the following standards shall be observed for proper installation:
• IEC/EN 60079-14 : 2012: "Explosive atmospheres - Part 14: Electrical installations design,
selection and erection"
• EN 1127-1 : 2011: "Explosive atmospheres - Explosion prevention and protection - Part 1:
Basic concepts and methodology"
Extended order code
The extended order code is indicated on the nameplate, which is affixed to the device in such a way
that it is clearly visible. Additional information about the nameplate is provided in the associated
Operating Instructions.
To Next Page
Loading...
