Endress+Hauser Nivector FTI26 - Page 10

Nivector FTI26
10 Endress+Hauser
A0036363
 6 Installation with Tri-Clamp and NA Connect provided by customer, can be ordered as an accessory
→  19
Installation with protector
• Protection of point level switch against damage by particularly abrasive or coarse product
• Outflow protection in silo for functional testing when silo is full
≥20 (0.8)
G 1½"
A0036361
 7 Installation with protector, can be ordered as an accessory →  19
Installation with protection cover
• Installation with protection cover against impact effects or
• in hazardous area
Please also ensure compliance with the corresponding national standards and regulations and the
Safety Instructions or Installation or Control Drawings →  21
• Fit the protection cover before the device is put into operation.
≥20 (0.8)
G 1"
A0036433
 8 Installation with protection cover, included in scope of delivery for hazardous areas or can be ordered as
an accessory →  19