Endress+Hauser Nivector FTI26 - Supplementary Documentation; Operating Instructions; Certificates; Registered Trademarks

Nivector FTI26
Endress+Hauser 21
Supplementary documentation
For an overview of the scope of the associated Technical Documentation, refer to the following:
• W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number from
nameplate
• Endress+Hauser Operations App: Enter the serial number from the nameplate or scan the 2D
matrix code (QR code) on the nameplate
Operating Instructions
• BA01830F → Nivector FTI26
• BA01832F → Nivector FTI26, IO-Link
Supplementary
documentation
• TI00426F/00/DE → Weld-in adapters, process adapters and flanges (overview)
• SD01622Z/00/YY → Weld-in adapter (assembly manual)
• SD00356F/00/EN→ Valve plug (assembly manual)
• SD02242F/00/A2 → Protector (Installation Instructions)
Certificates
Approval Documentation code Order code 10, option:
ATEX II 1/3D Ex ta/tc IIIC T100°C Da/Dc
CSA AEx/Ex ta/tc IIIC T100°C Da/Dc
EAC Ex ta/tc IIIC T100°C Da/Dc X
IECEx Ex ta/tc IIIC T100°C Da/Dc
XA01734F BO, CO, GO, IO
Registered trademarks
is a registered trademark of the IO-Link company group.