Nivector FTI26
Endress+Hauser 15
Surface roughness
Sensor surface in contact with process: Ra ≤ 0.76 µm (30 µin), ordering information: Product
Configurator order code for "Process connection" option "WDJ"
Operability
Operating concept for
devices with IO-Link
Operator-oriented menu structure for user-specific tasks
Quick and safe commissioning
Guided menus for applications
Reliable operation
Operation in the following languages:
Via IO-Link: English
Efficient diagnostic behavior increases measurement availability
• Remedial measures
• Simulation options
IO-Link information
IO-Link is a point-to-point connection for communication between the measuring device and an IO-
Link master. The measuring device features an IO-Link communication interface type 2 with a
second IO function on pin 4. This requires an IO-Link-compatible assembly (IO-Link master) for
operation. The IO-Link communication interface enables direct access to the process and diagnostic
data. It also provides the option of configuring the measuring device while in operation.
Physical layer, the measuring devices supports the following features:
• IO-Link specification: version 1.1
• IO-Link Smart Sensor Profile 2nd Edition
• SIO mode: yes
• Speed: COM2; 38.4 kBaud
• Minimum cycle time: 6 msec.
• Process data width: 16 bit
• IO-Link data storage: yes
• Block configuration: no
IO-Link download
http://www.endress.com/download
• Select "Software" as the media type.
• Select "Device Driver" as the software type.
Select IO-Link (IODD).
• In the "Text Search" field enter the device name.
https://ioddfinder.io-link.com/
Search by
– Manufacturer
– Article number
– Product type
To Next Page
Loading...
Need help?
General
