Endress+Hauser Proline Promag 50 - 3.3.2 Installing the Promag P Sensor

Installation Proline Promag 50
32 Endress+Hauser
Pipe mounting
Panel mounting
A0007544
A0007543
"
Caution!
Danger of overheating! If the device is mounted on a
warm pipe, make sure that the housing temperature
does not exceed +60 °C (+140 °F) which is the
maximum temperature permitted.
mm (inch)
Ø 20…70
(Ø 0.79…2.75)
~ ~ 6.1)155 (
245 (9.65)
~110 (~4.33)
210 (8.27)
+0.5 (+0.019)
–0.5 (–0.019)
+0.5 (+0.019)
–0.5 (–0.019)
mm (inch)
Q-Pulse Id
Active 30/09/2014
Page 32 of 52
Vendor Manual - Electromagnetic Flowmeter - Endress and Hauser - Model Proline Promag 50 - Operating Instructions
Q-Pulse Id VM454
Active 30/09/2014
Page 32 of 52