Endress+Hauser Proline Promass 83 Brief Operating Instructions

KA00024D/06/EN/15.12
71197503
Brief Operating Instructions
Proline Promass 83
Coriolis Mass Flow Measuring System
These Brief Operating Instructions are not intended to replace the
Operating Instructions provided in the scope of supply.
Detailed information is provided in the Operating Instructions and
the additional documentation on the CD-ROM supplied.
The complete device documentation consists of:
• These Brief Operating Instructions
• Depending on the device version:
– Operating Instructions and the Description of Device Functions
– Approvals and safety certificates
– Safety instructions in accordance with the approvals for
the device (e.g. explosion protection, pressure equipment
directive, etc.)
– Additional device-specific information

Endress+Hauser Proline Promass 83 Specifications

General

Measuring Principle	Coriolis
Application	Liquids, pastes, and slurries
Measured Variables	Mass flow, density, temperature
Process Temperature	-40 to 150 °C
Process Pressure	Up to 40 bar
Wetted Materials	Stainless steel
Output Signal	4...20 mA, HART, PROFIBUS DP, FOUNDATION Fieldbus
Approvals	ATEX, IECEx, FM, CSA
Housing Material	Stainless steel
Ingress protection	IP66 / IP67
Ambient Temperature Range	-40 to 60 °C
Process connection	Flanged, threaded