Endress+Hauser Proline Promass 83 - Block USER INTERFACE

Commissioning Proline Promass 83
22 Endress+Hauser
5.2 Operation
5.2.1 Display elements
5.2.2 Operating elements
5.2.3 Displaying error messages
A0007663
Display lines/fields
1. Main line for primary measured values
2. Additional line for additional measured
variables/status variables
3. Information line for bar graph display for example
4. Info icons, e.g. volume flow
5. Current measured values
6. Engineering units/time units
A0007559
Operating keys
1. (–) Minus key for entering, selecting
2. (+) Plus key for entering, selecting
3. Enter key for calling the function matrix, saving
When the +/– keys are pressed simultaneously (Esc):
• Exit the function matrix step-by-step:
• > 3 sec. = cancel data input and
return to the measured value display
A0007664
1. Type of error:
P = Process error, S = System error
2. Error message type:
$
= Fault message, ! = Notice message
3. Error number
4. Duration of the last error that occurred:
Hours: Minutes: Seconds
5. Error designation
• List of the most common error messages during
commissioning  ä 28
• List of all error messages, see associated Operating
Instructions on the CD-ROM
1
45
6
2
3
+24.502
+1863.97
x
x
y
y
–50
+50
%
v
v
3
S
Esc
E
+
-
1 2 3
+24.502
x
y
v
XXXXXXXXXX
#000 00:00:05
P
3 4
2
1 5