Proline Prosonic Flow 93 Installation
Endress+Hauser
9
3.4 Installing the transmitter
"
Caution!
• The ambient temperature range –20 to +60 °C (–4 to +140 °F) may not be exceeded at the
mounting location. Avoid direct sunlight.
• Always install the wall-mount housing in such a way that the cable entries point downwards.
3.4.1 Direct wall mounting
3.4.2 Pipe mounting
A0007542
1. Connection compartment
2. Securing screws M6 (max. ø 6.5 mm (0.25"));
screw head max. ø 10.5 mm (0.4")
3. Housing bores for securing screws
A0007543
"
Caution!
Danger of overheating!
If the device is mounted on a warm pipe, make sure that
the housing temperature does not exceed +60 °C
(+140 °F) which is the maximum temperature
permitted.
1
2
3
3
90 (3.54)
35 (1.38)
192 (7.56)
81.5 (3.2)
mm (inch)
mm (inch)
Ø 20…70
(Ø 0.79…2.75)
~ ~ 6.1)155 (
To Next Page
Loading...
