Endress+Hauser Proline Prosonic Flow 93 Brief Operating Instructions

Installation Proline Prosonic Flow 93
10 Endress+Hauser
3.4.3 Panel mounting
A0007544
3.5 Connecting the power supply
#
Warning!
Risk of electric shock. Components carry dangerous voltages.
• Never mount or wire the measuring device while it is connected to the power supply.
• Before connecting the power supply, check the safety equipment.
• Route the power supply cable so that it is seated securely.
• Seal the cable entries and covers tight.
• When wiring Ex-certified measuring devices, all the safety instructions, wiring diagrams,
technical information, etc. of the related Ex documentation must be observed
 Ex documentation on the CD-ROM.
"
Caution!
Risk of damaging the electronic components!
Connect the power supply in accordance with the connection data on the nameplate.
3.5.1 Connecting the transmitter
Wire the unit using the terminal assignment diagram inside the cover.
245 (9.65)
~110 (~4.33)
210 (8.27)
+0.5 (+0.019)
–0.5 (–0.019)
+0.5 (+0.019)
–0.5 (–0.019)
mm (inch)
A0010773
Transmitter connection:
1
2
Connection compartment cover
(connection diagram on the inside)
Power supply cable
2
1

Endress+Hauser Proline Prosonic Flow 93 Specifications

General

Brand	Endress+Hauser
Model	Proline Prosonic Flow 93
Category	Measuring Instruments
Language	English