Endress+Hauser Proline Prosonic Flow B 200 - Device Information

Proline Prosonic Flow B 200 HART Diagnostics and troubleshooting
Endress+Hauser 119
Navigation
"Setup" menu → Advanced setup → Administration → Device reset
‣
Administration
‣
Define access code
Define access code
Confirm access code
Device reset
Parameter overview with brief description
Parameter Description Selection Factory setting
Device reset Reset the device configuration - either
entirely or in part - to a defined state.
• Cancel
• To factory defaults
• To delivery settings
• Restart device
Cancel
12.9.1 Function scope of the "Device reset" parameter
Options Description
Cancel No action is executed and the user exits the parameter.
To delivery settings Every parameter for which a customer-specific default setting was ordered is reset
to this customer-specific value. All other parameters are reset to the factory
setting.
Restart device The restart resets every parameter whose data are in the volatile memory (RAM)
to the factory setting (e.g. measured value data). The device configuration remains
unchanged.
History reset Every parameter is reset to its factory setting.
12.10 Device information
The Device information submenu contains all the parameters that display different
information for identifying the device.
Navigation
"Diagnostics" menu → Device information
‣
Device information
Device tag
Serial number
Firmware version