Endress+Hauser Proline Prosonic Flow B 200 - Page 122

Diagnostics and troubleshooting Proline Prosonic Flow B 200 HART
122 Endress+Hauser
12.11 Firmware history
Release
date
Firmwar
e
version
Order code
for
"Firmware
version"
Firmware changes Documentation
type
Documentation
07.2015 01.02.zz Option 75 In accordance with HART
7 Specification
Operating
Instructions
BA01031D/06/EN/
03.15
11.2012 01.01.zz Option 76 • Local display with
backlighting.
• Integrated additional
operating languages:
Russian, Swedish
• New options for order
code for "Output":
– 4-20 mA HART
– 4-20 mA HART,
pulse/frequency/
switch output
• New wizard: Pulse/
frequency/switch
output
• Extension for Medium
selection: In the
Pressure
compensation
parameter, the
"External gauge
pressure" option has
been added to the list
of options available for
selection.
• Extension for HART
input: New "Failure
mode" parameter.
• Additional measured
variable: Mass flow
Operating
Instructions
BA01031D/06/EN/
02.12
01.2011 01.00.zz Option 78 Original firmware Operating
Instructions
BA01031D/06/EN/
01.11
Flashing the firmware to the current version or to the previous version is possible via
the service interface (CDI) .
For the compatibility of the firmware version with the previous version, the installed
device description files and operating tools, observe the information about the device
in the "Manufacturer's information" document.
The manufacturer's information is available:
• In the Download Area of the Endress+Hauser Internet site: www.endress.com →
Download
• Specify the following details:
– Product root: e.g. 9B2B
– Text search: Manufacturer's information
– Search range: documentation