Endress+Hauser Proline Prosonic Flow B 200 - Page 15

Proline Prosonic Flow B 200 HART Incoming acceptance and product identification
Endress+Hauser 15
4.2.2 Sensor nameplate
6
Date:
Order code:
Ser.No.:
Ext. ord. cd.:
Tm:
Materials:
i
1
2
3 4 5
13
9
10
11
147
15
17
16
pnom = PS =
ptest=
8
Ta:
12
A0016420
 3 Example of 1st sensor nameplate
1 Manufacturing location
2 Name of the sensor
3 Order code
4 Serial number
5 Extended order code
6 Nominal diameter of the sensor
7 Flange type
8 Test pressure of the sensor
9 Nominal pressure of the sensor (max. permitted pressure)
10 Material of measuring tube and seal
11 Medium temperature range
12 Ambient temperature range
13 Manufacturing date: year-month
14 2-D matrix code
15 Degree of protection, approval information for explosion protection and Pressure Equipment Directive
16 CE mark, C-Tick
17 Document number of safety-related supplementary documentation
Order code
The measuring device is reordered using the order code.
Extended order code
• The device type (product root) and basic specifications (mandatory features) are
always listed.
• Of the optional specifications (optional features), only the safety and approval-
related specifications are listed (e.g. LA). If other optional specifications are also
ordered, these are indicated collectively using the # placeholder symbol (e.g. #LA#).
• If the ordered optional specifications do not include any safety and approval-related
specifications, they are indicated by the + placeholder symbol (e.g. XXXXXX-ABCDE
+).