Endress+Hauser Prosonic S Series - Cantilever

Prosonic S FDU90/91/91F/92/93/95/96
30 Endress + Hauser
Cantilever The cantilever is used to mount the sensors FDU90, FDU91 and FDU92 above open channels for example.
L00-FMU4xxxx-06-00-00-yy-005
• The 35 mm orifices are for the sensors FDU9x.
• The 22 mm orifice may be used for an external temperature sensor (e.g. FMT131).
The cantilever can be mounted in the following ways:
• by a mounting frame (see below)
• by a wall bracket (see below)
Fixing screws are supplied.
A B C D Material Order code
585 mm 250 mm 2 mm 200 mm
galvanised steel 919790-0000
316Ti/1.4571 919790-0001
1085 mm 750 mm 3 mm 300 mm
galvanised steel 919790-0002
316Ti/1.4571 919790-0003
A
DM8
35
50
20
20
105
35
22
C
C
6.5
15
100
25
351007575 B