Prosonic S FDU90/91/91F/92/93/95/96
34 Endress + Hauser
Power supply RNB130 for the
FDU90/FDU91 sensor heater
Technical data
• Primary switched-mode power supply
• Input: 100 - 240 V AC
• Output: 24 V DC connection, max. 30 V in the event of a fault
• Connection to monophased a.c. networks or to two phase conductors of three-phase supply networks
(TN, TT or IT networks as per VDE 0100 T 300/IEC 364-3) with 100 - 240 V AC nominal voltage
For further information see Technical Information TI202R.
Product structure
IP66 protective housing for
the power supply RNB130
Order number: 51002468
For additional information refer to Technical Information TI080R.
010 Approvals
A Non-hazardous area
020 Connection
1Screw strip
3 Screw connection, power terminal block
030 Version
AStandard
RNB130 - complete product designation
To Next Page