Endress+Hauser Prosonic S Series - Product Structure FDU96; Scope of Delivery

Prosonic S FDU90/91/91F/92/93/95/96
Endress + Hauser 27
Product structure FDU96
Scope of delivery • Instrument according to the version ordered
• This Technical Information TI396F (serves as installation and operating instruction)
• for certified instrument versions: Safety Instructions (XA) or Control Drawings (ZD)
• for FDU90/91 with sensor heater: terminal module, to be mounted in the field housing of the transmitter
FMU90
• for FDU90/91/91F/92 with G1" process connection: counter nut (PA) + seal (EPDM)
• for FDU 93/95/96 with Ex-certificate: process seal (silicone)
010 Approval
C IEC Ex t IIIC IP6x Da/Db, Ex t IIIC IP6x Db
D IEC Ex t IIIC T6 Gb, Ex t IIIC IP6x Da/Db, Ex t IIIC IP6x Db
E ATEX II 1/2 D, -40 ... +140 °C
F ATEX II 1/2 D, -40 ... +80 °C
H ATEX II 3D (in preparation)
J ATEX II 2G EEx ma II T6, ATEX II 1/2D
K FM Cl.I,II,III Div. 1+2 Gr.A-G; LT; Ambient temperature: -40 ... +80 °C (176 °F), zone 2,21,22
L CSA Cl.I,II,III Div.1 Gr.E-G; LT; Ambient temperature: -40 ... +80 °C (176 °F), zone 2
P FM Cl.I,II,III Div. 1+2 Gr.A-G; HT; Ambient temperature: -40 ... +140 °C (284 °F), zone 2,21,22
R Non-hazardous area
T CSA Cl.II,III Div.1 Gr.E-G; HT; Ambient temperature: -40 ... +140 °C (284 °F), zone 2
U CSA General Purpose
W TIIS dust-Ex DP12 (in preparation)
1 NEPSI DIP (in preparation)
020 Process connection (threaded boss)
GThread ISO228 G1, UP
S Thread ISO228 G1, 304
N Thread ANSI NPT1, UP
V Thread ANSI NPT1, 304
030 Cable length
15 m/16 ft
2 10 m/32 ft
3 15 m/49 ft
4 20 m/65 ft
5 25 m/82 ft
6 30 m/98 ft
8 ... m (variable length, up to 300 m)
A ... ft (variable length, up to 985 ft)
040 Additional options
A Basic version
FDU96 - product designation