Endress+Hauser Prosonic T FMU30 - Materials

Prosonic T FMU30
Endress+Hauser 15
Materials
L00-FMU3xxxx-16-00-00-xx-001
Note!
The chemical compatibility of the sensors must be checked before installation with compatibility charts.
Pos. Part Material
1
Cover (grey) PBT
Cover (transparent) PA
O-ring EPDM
2 Ground terminal:
Screws
Spring washer
Clamp
Holder
A2
A4
304 (1.4301)
301 (1.4310)
3 Nameplate Polyester
4O-ring EPDM
5 Sensor (in contact with process) PP
6 Matching Layer (in contact with process) EPDM
7 Counter nut (in contact with process) PC
8 Sealing (in contact with process) EPDM
9 Sealing EPDM
10 Adapter of housing PBT GF 30-FR
11 Goretex filter PBT-20GF / grey RAL7035
12
Cable gland Polyamid (PA)
Plug PBT-GF30
13 Housing PBT-FR
1
13
12
2
4
5
7
9
8
3
10
6
11
Заказывайте на сайте: www.tinnova.ru/endress_hauser/ || Эл. почта: info@tinnova.ru