Prosonic T FMU30
20 Endress+Hauser
Certificates and Approvals
CE mark The measuring system meets the legal requirements of the EC-guidelines. Endress+Hauser confirms the
instrument passing the required tests by attaching the CE-mark.
Ex approvals •ATEX
•IECEx
•CSA C/US
•NEPSI
Additional safety instructions must be observed for applications in hazardous areas. They arecontained in the
separate "Safety Instructions" (XA) document, which is included in the scope ofdelivery. Reference is made to
the XA on the nameplate of the device.
Note!
Details on the available certificats as well as the associated XAs can be found in the Associated documentation
chapter documentation ä 27.
Ex approval The available certificates are listed in the ordering information. Note the associated safety instructions (XA) and
control or installation drawings (ZD).
External standards and
guidelines
EN 60529
Protection class of housing (IP-code)
EN 61326 series
EMC product family standard for electrical equipment for measurement, control and laboratory use
NAMUR
User association for automation technology in process industries
Заказывайте на сайте: www.tinnova.ru/endress_hauser/ || Эл. почта: info@tinnova.ru
To Next Page
Loading...
