Endress+Hauser Prosonic T FMU30 - Commissioning Process; Initial Setup

Prosonic T FMU30
Endress+Hauser 27
Commubox FXA291 The Commubox FXA291 connects Endress+Hauser field instruments via the service interface to the USB
interface of a personal computer or a notebook. For details refer to TI00405C/07/EN.
Note!
For the FMU30 you need the "ToF Adapter FXA291" as an additional accessory.
ToF Adapter FXA291 The ToF Adapter FXA291 connects the Commubox FXA291 via the USB interface of a personal computer or
a notebook to the FMU30.
For details refer to KA00271F/00/A2.
Documentation
Operating manual BA00387F
This instruction describe the installation and first commissioning of the instrument. From the operating menu,
all functions are included, which are required for standard measurement tasks. Additional functions are not
contained in the manual.
The documentation can be found on the supplied documentation CD. The documentation is also available via
the Internet  siehe: www.endress.com  Download.
Description of device
functions
BA00388F
This contains a detailed description of all the functions of the isntrument and is valid for all communication
variants.
The documentation can be found on the supplied documentation CD. The documentation is also available via
the Internet  www.endress.com  Download.
Short instructions KA01054F
is for rapid commissioning of the device. The instructions are attached to the device. The documentation can
be found on the supplied documentation CD.
The documentation is also available via the Internet  www.endress.com  Download.
KA00290F
can be found under the device housing cover.
The most important menu functions are summarised on this sheet. It is intended primarily as a memory jogger
for users who are familiar with the operating concept of Endress+Hauser time-of-flight instruments.
Safety Instructions Depending on the approval, the following Safety Instructions (XA) are supplied with the device. They
are an integral part of the Operating Instructions.
For certified devices the relevant Safety Instructions (XA) are indicated on the nameplate.
Certificate/type of protection Documentation Order code
Feature Version
ATEX II 1/2 G Ex ia IIC T5 Ga/Gb
XA01054F
10
BB
IECEx, Ex ia IIC T5 Ga/Gb CB
Ex ia Class I, Division 1, Group A-D, T5
Class I, Zone 0, AEx/Ex ia IIC T5 Ga
XA01080F IB
NEPSI Zone 0/1, Ex ia IIC T5 Ga/Gb XA01264F NB
Заказывайте на сайте: www.tinnova.ru/endress_hauser/ || Эл. почта: info@tinnova.ru