Endress+Hauser Prosonic T FMU30 - Page 2

Brief operating instructions Prosonic T
2 Endress+Hauser
Brief operating instructions
L00-FMU30xx-05-00-00-en-001
Contents of the operating instructions
This operating instructions describes the installation and commissioning of the Prosonic T ultrasonic
level transmitter. It contains all the functions required for a normal measuring operation. Also, the
instrument provides additional functions for optimising the measuring point and for converting the
measured value. These functions are not included in this operating instructions.
You can find an overview of all the device functions in the Appendix.
You can find a detailed description of all the device functions in the operating instructions
BA00388F/00/EN "Prosonic T - Description of Instrument Functions". This is located on the
supplied documentation CD-ROM.
F
L
D
E
… …
KA290F/00/A2/12.09
71106912
BD
… …
100%
0%
100
333
… …
… …
71106912
SD
Prosonic T - Quick Setup
- dome
ceiling
- horizontal
cyl.
- bypass
…
- unknown
- liquid
->4mm
-<4mm
(> 0.16 in)
( 0.16 in)
<
- standard
- calm
surface
- add. agitator
…
input E
(see sketch)
input F
(see sketch)
-ok
- too small
- too big
- unknown
- manual
displayed
(see sketch)
D and L are
confirm
or specify
range
suggestion
000
measured value
Group
selection
00
basic setup
01
safety settings
0C
system
parameter
0E
Envelope curve
04
linearisation
05
extended calibr.
06
output
0A
diagnostics
0A0
present
error
002
tank shape
004
process
cond.
005
empty
calibr.
006
full
calibr.
008
dist./
meas value
051
check
distance
003
medium
property
052
range of
mapping
053
start
mapping
008
dist./
meas value
0E1
plot settings
0E2
recording
curve
0A1
previous
error
0A4
unlock
parameter
03
temperature
09
display
092
language
BD: blocking distance
and : increase contrast
and : decrease contrast
0A3
reset
0C0
tag no.
SD: safety distance