Prosonic T Operation
Endress+Hauser 23
5.4 Operation using the on-site display
L00-FMU30xxx-19-00-00-en-018
1. Change from Measured Value Display to Group Selection by pressing E.
2. Press - or + to select the required Function Group and confirm by pressing E.
The active selection is marked by a ✓ in front of the menu text.
3. Activate Edit mode with + or - .
Selection menus
a. Select the required Parameter in selected function with - oder + .
b. E confirms selection; ✓appears in front of the selected parameter.
c. E confirms the edited value; system quits edit mode.
d. + and - interrupts selection; system quits edit mode.
Typing in numerals and text
a. Press + or - to edit the first character of the numeral / text.
b. E positions the cursor at the next character; continue with a. until you have completed your
input.
c. If a symbol appears at the cursor, press E to accept the value entered; system quits edit
mode.
d. If a symbol appears at the cursor, press E to return to the previous character (e.g. for
correction of entries).
e. + and - interrupts selection; system quits edit mode.
4. Press E to select the next function.
5. Press + and - once; return to previous function.
Press + and - twice; return to Group Selection.
6. Press + and - to return to Measured value display.
To Next Page
Loading...
