Endress+Hauser Prosonic T FMU30 - Scope of Delivery; Certificates and Approvals; Registered Trademarks

Identification Prosonic T
8 Endress+Hauser
2.3 Scope of delivery
• Instrument according to the version ordered
• Accessories ( ä 43)
• Brief operating instructions KA01054F/00/EN for quick commissioning
• Brief operating instructions KA00290F/00/A2 (basic setup/troubleshooting), housed in the
instrument)
• For certified instrument versions: Safety Instructions, Control- or Installation drawings
• counter nut (PC): option 50, versions GGF/GHF  ä 7 "Product structure"
• sealing ring (EPDM): option 50, versions GGF/GHF  ä 7 "Product structure"
• for gland M20x1.5: cable gland
The cable gland is mounted on delivery.
• CD-ROM with further documentation, e. g.
- Technical Information
- Operating Instructions
- Description of Intrument Functions
2.4 Certificates and approvals
CE mark, declaration of conformity
The device is designed to meet state-of-the-art safety requirements, has been tested and left the
factory in a condition in which it is safe to operate. The device complies with the applicable
standards and regulations as listed in the EC declaration of conformity and thus complies with the
statutory requirements of the EC directives. Endress+Hauser confirms the successful testing of the
device by affixing to it the CE mark.
2.5 Registered trademarks
FieldCare
®
Trademark of Endress+Hauser Process Solutions AG.
ToF
®
Registered trademark of the company Endress+Hauser GmbH+Co. KG, Maulburg, Germany
PulseMaster
®
Trademark of the company Endress+Hauser GmbH+Co. KG, Maulburg, Germany