Endress+Hauser Prosonic T FMU30 - Calibration Procedures

Commissioning Prosonic T
28 Endress+Hauser
6.2 Basic calibration
The "Basic setup" (00) function group lists all the functions which are required for a standard
measurement task to commission the instrument. When you have completed your input for a
function, the next function appears automatically. In this way, you are guided through the complete
calibration.
6.2.1 Measuring point settings
Function "tank shape" (002)
In this function, select one of the following options:
L00-FMU30xxx-14-00-06-xx-001
A dome ceiling
B horizontal cyl.
C bypass, stilling well/ultrasonic guide pipe
D no ceiling, e.g. dumps, open levels, chanels, weirs
E sphere
F flat ceiling
Function "medium property" (003)
Set the medium type in this function.
You have the following options:
• unknown (e.g. pasty media such as greases, creams, gels etc.)
• liquid
• solid, grain size < 4 mm, (fine)
• solid, grain size > 4 mm, (coarse)
A
BC
DE
F