Prosonic T Identification
Endress+Hauser 7
2.2 Product structure
Versions that mutually exclude one another are not marked.
You can fill in the options of the respective feature into the following table. The filled in options
result in the complete order code.
010 Approval:
AA Non-hazardous area
BB ATEX II 1/2G Ex ia IIC T5
CA CSA C/US General Purpose
CB CSA C/US IS CI.I Div.1 Gr.A-D
IB IEC Ex zone 0/1, Ex ia IIC T5 Ga/Gb
NB NEPSI zone 0/1, Ex ia IIC T5 Ga/Gb
99 Special version
020 Display; Operating:
G W/o; via spare part display FMU30
H Envelope curve display on site; push button
Y Special version
030 Electrical Connection:
E Gland M20, IP68
F Thread G1/2, IP68
G Thread NPT1/2, IP68
YSpecial version
040 Sensor; Max Range; Blocking Distance:
AA 1-1/2"; 5m liquid/2m solid; 0.25m
AB 2"; 8m liquid/3.5m solid; 0.35m
YY Special version
050 Process Connection:
GGF Thread ISO228 G1-1/2, PP
GHF Thread ISO228 G2, PP
RGF Thread ANSI MNPT1-1/2, PP
RHF Thread ANSI MNPT2, PP
YYY Special version
620 Accessory Enclosed:
RA UNI flange 2"/DN50/50, PP max 4bar abs/58psia, suitable for 2" 150lbs/DN50 PN16/10K 50
RB UNI flange 2"/DN50/50, PVDF max 4bar abs/58psia, suitable for 2" 150lbs/DN50 PN16/10K 50
RC UNI flange 2"/DN50/50, 316L max 4bar abs/58psia, suitable for 2" 150lbs/DN50 PN16/10K 50
RD UNI flange 3"/DN80/80, PP max 4bar abs/58psia, suitable for 3" 150lbs/DN80 PN16/10K 80
RE UNI flange 3"/DN80/80, PVDF max 4bar abs/58psia, suitable for 3" 150lbs/DN80 PN16/10K 80
RF UNI flange 3"/DN80/80, 316L max 4bar abs/58psia, suitable for 3" 150lbs/DN80 PN16/10K 80
RG UNI flange 4"/DN100/100, PP max 4bar abs/58psia, suitable for 4" 150lbs/DN100 PN16/10K 100
RH UNI flange 4"/DN100/100, PVDF max 4bar abs/58psia, suitable for 4" 150lbs/DN100 PN16/10K 100
RI UNI flange 4"/DN100/100, 316L max 4bar abs/58psia, suitable for 4" 150lbs/DN100 PN16/10K 100
R9 Special version
895 Marking:
Z1 Tagging (TAG), see additional spec.
010 020 030 040 050 620 895
FMU30 -
To Next Page
Loading...
