Soliphant M FTM50, FTM51, FTM52
24 Endress+Hauser
Certificates and approvals
CE mark,
declaration of conformity
The instrument is designed to meet state-of-the-art safety requirements, has been tested and left the factory
in a condition in which it is safe to operate.
The instrument complies with the applicable standards and regulations as listed in the EC declaration of
conformity and thus complies with the statutory requirements of the EG directives.
Endress+Hauser confirms the successful testing of the instrument by affixing to it the CE mark.
Ex approval Your Endress+Hauser sales centre can provide you with information on the Ex versions which can currently
be delivered.
All explosion protection data are given in a separate documentation (see "Supplementary documentation")
which is available upon request.
Copies of certificates available upon request.
Type of protection See "Ordering information" as of Page 25 and "Supplementary documentation" on Page 32.
Other standards and
guidelines
Other standards and guidelines that were taken into consideration in designing and developing Soliphant M
FTM50, FTM51, FTM52:
• Low Voltage Directive (73/23/EEC)
• DIN EN 61010 Part 1, 2001
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures
Part 1: General requirements
• EN 61326
Electrical Equipment for Measurement, Control and Laboratory Use
EMC requirements
To Next Page
Loading...
Need help?
General
