Endress+Hauser Soliwave FDR56 - Page 9

Soliwave FDR56/FQR56
Endress+Hauser 9
Mounting
4.1.2 Optimization of the signal quality
If the microwave barrier devices are installed in front of microwave-permeable windows or
plugs, it is possible to optimize the signal quality by moving FQR56 and FDR56 on their longi-
tudinal axis aer an automatic adjustment has been performed.
FQR56 FDR56
a
b
0000000158
3 Optimizationofthesignalquality
4.1.3 Reector operation
Arrange devices symmetrically to the reector (entrance angle = exit angle).
Range reduction per reector: 10%
α
α
α
α
α
α
1 1 1
0000000165
4 Reflectoroperation
1 Reflector
α Angleofentrance=angleofemission