Turbimax CUS51D Accessories
Endress+Hauser 41
12 Accessories
The following are the most important accessories available at the time this documentation
was issued.
Listed accessories are technically compatible with the product in the instructions.
1. Application-specific restrictions of the product combination are possible.
Ensure conformity of the measuring point to the application. This is the responsibility
of the operator of the measuring point.
2. Pay attention to the information in the instructions for all products, particularly the
technical data.
3. For accessories not listed here, please contact your Service or Sales Center.
12.1 Device-specific accessories
12.1.1 Assemblies
FlowFit CUA120
• Flange adapter for mounting turbidity sensors
• Product Configurator on the product page: www.endress.com/cua120
Technical Information TI096C
Flexdip CYA112
• Immersion assembly for water and wastewater
• Modular assembly system for sensors in open basins, channels and tanks
• Material: PVC or stainless steel
• Product Configurator on the product page: www.endress.com/cya112
Technical Information TI00432C
Cleanfit CUA451
• Manual retractable assembly made of stainless steel with ball valve shut-off for turbidity
sensors
• Product Configurator on the product page: www.endress.com/cua451
Technical Information TI00369C
Flowfit CYA251
• Connection: See product structure
• Material: PVC-U
• Product Configurator on the product page: www.endress.com/cya251
Technical Information TI00495C
12.1.2 Cable
Memosens data cable CYK11
• Extension cable for digital sensors with Memosens protocol
• Product Configurator on the product page: www.endress.com/cyk11
Technical Information TI00118C
To Next Page
Loading...
Need help?
General
