User Manual
>> service >> 010
Service
Troubleshooting
Computer display is not working
• The computer might not be getting power. Check if the batteries are
inserted properly.
• The batteries might need to be replaced.
• Contact your local ENERGETICS-dealer if you have checked all connections
and the display is still not working.
The computer does not show values during the workout
•
Check if the data cable is connected properly.
Heart rate (PULSE) shows no or incorrect read out
•
Check if your palms have proper contact with the sensors. Both palms have
to be in contact with the sensors simultaneously. The display may be on a
slight delay.
• Check all cable connections.
• Try moistening your hands if they are dry.
The computer has shut down
I
n rare cases the computer might shut down, mainly because of sudden
changes in the electrical current or static discharge. Normally the E-101
restarts on its own.
If this should not occur a restart can be performed by removing the batteries
for a moment and reinserting them.
Care
Take care that to avoid any moisture penetration. Clean the computer with a
lightly dampened cloth. Do not use abrasive cleaning solutions.
Maintenance
There is no need for special maintenance. Regularly check that all bolts and
connections have a tight t. Exchange any defective parts immediately. For
assistance contact your local ENERGETICS-dealer.
To Next Page
Loading...
