User Manual
>> introduction | legend >> 004
Legend
The display and it’s symbols
(D1) Orientation line – blinking triangle for each displayed value
(D2)
blinking: transmission of heart rate active
(D3) K
– unit used for measurement (kilometre) or kilometre/hour
(D4) Main display
– scanning through various values
The computer housing
Front
(C1) Display
– shows measured values
(C2) MODE – scans through a variety of display functions
Back
(
C3) Battery Compartment
(C4) PULSE INPUT – connector for the hand pulse sensors of your device
(C5) Connecting cable – data line
Introduction
Dear customer
We thank you for choosing ENERGETICS Fitness Equipments.
The computer oers the standard functions necessary to control your easily
control your training and design your work outs.
The various values collected during exercise are being scanned through on
the display. You can also choose to see a specic value individually at any
time during exercise.
Especially the measurement and display of your current heart rate oers you
the possibility to gear your work out toward important fundamentals for ef
-
f
ective training as determined by sports science.
Before you start your workout please read the computer manual carefully.
We wish you success and continued enjoyment using your
ENERGETICS Fitness Equipment.
Your ENERGETICS - Team