39Installation instructions
EN
List of extra equipment
EXTRA EQUIPMENT AVAILABLE
Code Explanation
K58 004 0001 eWind control panel package.
The package includes the control panel, a surface mounted junction box, and 10 m cable.
K93 003 0004 CO2 carbon dioxide transmitter for installation on the wall 0-10V / 24V
M23 010 0007 Built-in CO2 carbon dioxide sensor T8031
K91 103 0022 CO carbon monoxide sensor
K93 003 0006 %RH humidity transmitter for installation on the wall 0-10V / 24V
M23 011 0002 % RH humidity transmitter for installation in the duct KLK 100
K93 003 0008 Push button for activating over pressure/boosting
K93 003 0029 KNX gateway
K93 014 0004 Damper Ø 125 mm (without isolation, tightness class 3)
K93 002 0001 Damper Ø 160 mm (without isolation, tightness class 3)
K93 002 0002 Damper Ø 200 mm (without isolation, tightness class 3)
K93 002 0003 Damper Ø 250 mm (without isolation, tightness class 3)
K93 002 0004 Damper motor with spring return 230 VAC, 4 Nm
To Next Page
Loading...
