enervent eWind Series - Technical Features

44
Water-to-air
after-heating*
Liquid circulation
cooling
(geo-cooling)*
Liquid
circulation
precooling/
heating
(CHG)*
Air –
ground
heat
exchanger
(AGH)
Model
eWind
control
system
with
eWind
panel
No after-
heating
/
-cooling
Built-in
electrical
after-
heating
Built-in Duct coil Built-in Duct coil Duct coil
Ground
ducting
not
available
from
Enervent
LTR-6-190
eWind W
X X
LTR-6-190
eWind E-CG
X X X
LTR-6-190
eWind E-CHG
X X X
LTR-6-190
eWind E-AGH
X X X
LTR-7 eWind E X X
LTR-7 eWind W X X
LTR-7 eWind
E-CG
X X X
LTR-7 eWind
E-CHG
X X X
LTR-7 eWind
E-AGH
X X X
LTR-7 XL eWind
E
X X
LTR-7 XL eWind
W
X X
LTR-7 XL eWind
E-CG
X X X
LTR-7 XL eWind
E-CHG
X X X
LTR-7 XL eWind
E-AGH
X X X
Technical features
Technical features are subject to change without prior notice. The declared AHU performance values are indicative
only. The performance of a given AHU under certain conditions must be checked from the Energy Optimizer
calculation program on the Ensto Enervent web site.
PINION, PINGVIN, PINGVIN XL, PANDION, PELICAN, PEGASOS, PEGASOS XL
UNIT PINION PINGVIN PINGVIN XL PANDION PELICAN PEGASOS PEGASOS XL
Width
Depth
Height
589 mm
320 mm
630 mm
580 mm
500 mm
540 mm
780 mm
555 mm
540 mm
785 mm
543 mm
895 mm
998 mm
590 mm
1 270 mm
1 250 mm
677 mm
1 400 mm
1 250 mm
677 mm
1 400 mm
Weight 53 kg 50 kg 63 kg 90 kg 125 kg 203 kg 203 kg
Duct size Ø 125 mm Ø 160 mm Ø 160 mm Ø 160 mm Ø 200 mm Ø 250 mm Ø 250 mm
EC fans supply
and extract
118 W /
1,0 A
118 W /
1,0 A
163 W /
1,3 A
163 W /
1,3 A
170 W /
1,22 A
520 W /
3,15 A
545 W /
3,5 A
Control card
5x20 mm
Glass tube fuse
T0,8 A T0,8 A T0,8 A T0,8 A T0,8 A T0,8 A T0,8 A
Heat exchanger
motor with heat
protection
5 W, 0.04 A 5 W, 0.04 A 5 W, 0.04 A 5 W, 0.04 A 5 W, 0.04 A 5 W, 0.04 A 5 W, 0.04 A