EnGenius DuraFon PRO - Handset Controls and Alerts

14
display status, message, menu selections, or user-editable
alphanumerical characters.
e.
The last line displays the left and right soft keys.
Re: There is only right soft key in idle mode of DuraWalkie.
Note:”◎”means only shown on DuraFon PRO handset.
2.
Ringer
a.
Rings to an incoming call.
b.
Distinctive alert sounds indicating various events:
(1)
Single Beep: successful key entry
(2)
Double beep: failed operation or invalid key entry, also
indicates power on/off
(3)
Periodic 1-Long-2-Short Beep (repeat every 10 seconds):
low battery warning
(4)
Periodic 1-Long-2-Short Beeps (repeat every 30 seconds):
indicates a call is on-hold
3.
TALK/FLASH/( )(For DuraFon PRO only)
a.
Places or answers a telephone or intercom call
b.
Sends a Flash signal to phone line to retrieve a dial tone after
the call ends, or to perform the call waiting feature provided by
local phone companies during a call.
c.
Press and hold the key for one second to enable/disable
speakerphone
4.
KEYLOCK/( )(For DuraWalkie only)
a.
In Idle mode, press to lock up the keypad
b.
In 2-Way/Intercom mode, press and hold key to
enable/disable speakerphone.
5.
2-WAY/INTERCOM(
)
a.
Places an intercom call to another handset ID or a group ID.
b.
Intercom calls are digital, full duplex, and are conducted
without the assistance from the base.
c.
Press and hold key for one second to enable/disable
speakerphone.
6.
BROADCAST(
)
Half duplex broadcasting to handsets for immediate announcement