EnGenius DuraFon PRO - Remote Registration and Group Subscriptions

40
Notes:
1. The base has a 30 second registration timeout starting from pressing
the REG button. The handset has a 12 second registration timeout
starting from the time registration or de-registration option has been
selected. The base and handset will automatically exit registration
mode after timeout.
2. Repeat registration or de-registration process if unsuccessful.
Advanced Registration:
1.
Advanced registration functions can be performed by administrator
handsets (ID 10 and 11) only.
2.
Administrator handsets can perform advanced registration function
as long as it is within range with the base station. The base station
does not need to be in registration mode.
3.
De-register a Handset ID by administrator:
a.
Make sure that the administrator handset is within the coverage
range of the base station.
b.
Press administrator handset MENU (Right) soft key
c.
Press the number 9 , this will enter the handset administration
menu.
d.
Press number 1 , handset enters system setting menu.
e.
Press number 4 , and enter the two-digit Handset ID to be
cleared.
f.
Upon successful operation, the handset LCD will display “Done”,
otherwise it will show “Message not received, try again”.
4.
Obtain a Specific Handset ID:
a.
If a particular Handset ID is preferred over sequentially assigned
ID, the administrator can “tell” the base in advance what the
next ID assignment should be.
b.
Press administrator handset MENU (Right) soft key.
c.
Press the number 9 , this will enter the handset administration
menu.
d.
Press number 1 , handset enters system setting menu.
e.
Press number 5 , and enter the two-digit Handset ID to be
assigned next by the base.
f.
Upon successful operation, the handset LCD will display “Done,”
otherwise it will show “Message not received, try again.”
g.
If the handset ID is already in use by another handset, the