EnGenius DuraFon PRO - Volume Adjustment and Call Management

35
information may have been blocked by the caller or the originating
phone company.
Receiving an Intercom Call
1.
When an intercom call arrives, the handset will ring or vibrate unless
the ringer has been turned off. Press to answer the intercom
call.
2.
If the handset is on the charger cradle (ringer will be temporarily
switched to “Ring” if it has been set to “Vibrate”), lift the handset
and start the conversation.
3.
If the handset is not on the cradle, press any key (except and
the SILENT soft key) to answer.
4.
During the call, press and hold the key, the speakerphone is
active.
Notes:
1. The LCD displays the caller’s Handset ID.
2. You can press the SILENT if you choose to ignore the call. Unlike
turning off the ringer the SILENT key operation is valid only for
the current call.
Ending a Call
To end a telephone or intercom call, press key or place handset into
charging cradle.
Adjusting Receiver (Earpiece) Voice Volume
1.
Voice volume can only be adjusted during a call.
2.
There are 6 levels of volume selections. Default as volume 3. Use
and scrolling key to adjust.
3.
The new setting remains effective for all future calls until changed.