EnGenius DuraFon PRO - Phonebook Operations; Adding and Managing Phonebook Entries

50
5. Press number 2 , handset enters Line Setting menu.
a. Enter Base ID(00~07) to access base.
b. Press 1 to enter Broadcast setting
i. Press handset OFF(Right soft key) to disable broadcasting function;
ii Or press handset ON(Left soft key) to enable broadcasting function
c. Press 2 to enter Line dedication setting
i Select base’s line and press handset OK(Right soft key)
ii Line Dedicate confirm:
Press NO(Right soft key) to go back Line Setting Menu.
Press YES(Left soft key) then enter extension number.
Note:
De-registration by the administrator will disable a handset’s ability to use the
base station to make or receive phone calls. This also frees up the ID for future
registratio
Phonebook Operations
1.
You can store up to 90 entries in the phonebook. Each entry can
contain a phone number or handset ID (up to 28 digits) and a
name (up to14 characters).
Re: For DuraWalkie, each entry can store 2 digits handset ID or
Group ID.
2.
To access phonebook, press MENU followed by 2 or or
scrolling key when handset in standby mode.
3.
To add a new entry:
a.
Press ADD soft key.
b.
Enter a phone number when LCD prompts “Number?” Use
DELETE soft key to delete the last digit entered. Press SAVE
when completed.
c.
You will then be prompted to enter a name for the phone
number just entered.
(1)
Press SAVE key to enter a phone number without a name.
All records without a name will be placed on top of the
list, in the order they are entered.
(2)
To enter the name, press the corresponding keypad
number one or more times according to the order of the
character on the key.