EnGenius DuraFon PRO - Making a Broadcast

33
2.
Press key to end the call.
3.
During the call, press and hold the key, the speakerphone is
active.
Notes:
1. Intercom calls can be made regardless if the Base Station is present.
2. If a Group ID is entered, the first handset (belonging to that group)
that answers will establish a link with the caller. See Handset Group
Subscription.
3. If a link cannot be established, the LCD shows “No Connection” after
a 12-second time out.
Making a Broadcast
1.
Broadcasting all handsets
a.
Press & hold key from one handset
b.
A series of beeps will indicate initiation of handset broadcast
to all handsets within communication coverage
c.
Begin speaking after the series of beeps has ended.
d.
Release key to end the broadcasting
2.
Broadcasting a group of handsets
a.
Enter the Group ID and then press & hold key
b.
A series of beeps will indicate initiation of handset broadcast to
all handsets within communication coverage
c.
Begin speaking after the series of beeps has ended.
d.
Release key to end the broadcasting
3.
Broadcasting an individual handset
a.
Enter the Handset ID and then press & hold key
b.
A series of beeps will indicate initiation of handset broadcast to
all handsets within communication coverage
c.
Begin speaking after the series of beeps has ended.
d.
Release key to end the broadcasting
Notes:
1. You need to continuously press key when doing broadcast.