EnGenius DuraFon PRO - Call Transfer and Conferencing

41
administrator will be alerted. In that case, the administrator can
choose another ID or asks the handset having the desired ID to
vacate by de-registering with the base.
h.
Perform registration immediately afterward for the handset
desiring a specific ID to ensure that the ID is not taken by
another handset.
5.
Remotely register Handset :
a.
If base install in ceil or higher location, administrator handsets
can perform remote registration.
b.
Press administrator handset MENU (Right) soft key
c.
Press the number 6 , this will enter registration mode.
d.
Press number 3 , this will replace the procedures to press &
hold the base REG button until the L1, L2, L3 and L4 LED come
on.
e.
Proceeding the handset registration process for new handsets.
Notes:
1. De-registration by the administrator will disable a handset’s ability to use the
base station to make or receive phone calls. This also frees up the ID for future
registration.
2. Handsets de-registered by the administrator can still perform intercom to
other handsets.
Handset Group Subscription
1.
Up to nine handset groups (01-07) can be defined and handsets can decide
which group(s) they want to be in.
2.
For example, Group 1 represents the Customer Service Group, Group 2
represents the Sales Group, and Group 3 is the Marketing Group. Suppose that
Handset 11 wants to receive incoming rings for all Sales and Marketing related
calls. Then handset 11 will need to “subscribe” to Group 2 and Group 3.
3.
Group Selections:
a.
Press handset MENU 5 to enter the handset setting menu
b.
Press number 2 , handset enters group select menu.
c.
Press ADD soft key and enter two-digit group number (01~07)
to add membership in a group.
d.
Repeat for all desired groups.
e.
Delete group selections by pressing DELETE (Right) soft key and