d. The handsets which intend to work with the repeater require enabling a
“Repeater Mode”.
e. When enabling the “Repeater Mode”, both intercom and broadcast calls will go
via the repeater, instead of the original direct handset to handset (P2P mode).
f. A repeater will no linger to support any PSTN call.
g. No support put the repeaters in cascade.
h. When using a repeater, if the repeater is busy or not available, after time out
period (broadcast: 8 sec, intercom : 40 sec) the call will be convert to “P to P”
instead.
To Next Page
Loading...
