C146200300.fm
- 10 -
INFORMATION ON TRANSFER AND INSTALLATION
PACKAGE AND UNPACKAGE
– The dispenser is packed in a specific package, and its external surfaces are protected
by a special film. When unpacking, carefully eject the dispenser and make sure it is in-
tact.
Should some part be damaged or missing, never install the dispenser and contact an
ENOMATIC authorized dealer to schedule future actions.
– Important information on dispenser safe transfer are reported on the package.
Package must be disposal according actual laws and rules.
Safely store the package in case of eventual further transfer.
TRANSPORTING AND STORING
– Transportation, regarding the place of ar-
rival, can be done through different
means.
The diagram shows most adopted solu-
tions.
– In order to protect the dispenser during
transportation, it is properly packed.
During transportation, the package must
remain in vertical position as shown by
symbols on it.
Important information on dispenser safe
transfer are reported on the package.
To Next Page
Loading...