C146200300.fm
- 25 -
DEFROST MODE
Act as per instruction.
Touch about 2 seconds button (P)
Display (M) shows duty status reference.
– "d0": function disabled
– "d1": function enabled
After about 5 seconds, display will show tem-
perature value again (°C).
Defrost cycle ON is shown by dots
next to digits on display (M).
In case of uncompleted ice melt when
defrost is over, turn the dispenser off
to end melting process. Should the
problem persist, please contact Eno-
matic Technical Service or your local
agent.
To Next Page
Loading...