C146200300.fm
- 15 -
FUNCTIONS AND USE
DISPENSER USE (FIRST TIME)
When operating the dispenser for the first time, some specific procedures will be run; those
will not be repeated when in regular use.
Act as per instruction.
1. Make sure to have turned main electrical
switch (A) to O (OFF) position.
2. Make sure to have plugged electrical cord
(B).
3. Supply gas to the dispenser and check
correct pressure value.
4. Turn switch (A) to I (ON).
All buttons will lamp and the dispenser
runs a quick check-up.
When check-up is finished, buttons turn
off.
5. Display (M) will show possible tempera-
ture scales.
– Celsius (°C) temperature scale.
– Fahrenheit (°F) temperature scale.
6. Touch the button (L) to select desired
temperature scale.
To Next Page
Loading...