C146200300.fm
- 29 -
Next to bottle neck pin (no bottle
engaged) gas overflows.
Gas valve is open due clog
bottle neck pin.
Manually unlock bottle neck pin.
Sanitize the dispensing tap
Nitrogen comes out from
dispenser rear
Nitrogen/argon supply
connection is defective
Restore proper nitrogen/argon
duty condition
The piston lowers when a bottle
is engaged
Pressure supplying bottle lifting
pistons is fail or nitrogen/argon
tank is empty
Restore proper nitrogen/argon
duty condition
The wine is not poured at preset
temperature
Engaged bottle temperature is
higher or lower than the one
preset for pour
Replace the bottle in the
dispensing tap
The dispenser doesn't reach
preset temperature
Thermal facilities outlets aren't
properly ventilated (i.e. outlets
might be clog) or is out of order
Restore proper ventilation
condition for thermal facilities or
ask to an authorized Service
Centre for replacement
Chart 3: Malfunctions
Trouble Origin Solution
To Next Page
Loading...