Harmonised Standards
The RT 7/9 series hay rakes have been designed according to the Standards described
in Machinery Directive 2006/42/CE and in particular, satisfy the following harmonized
Standards:
EN 13854:2020 Safety of machinery - Minimum gaps to avoid crushing of parts of the
human body
EN 4413:2012 Hydraulic fluid power -- General rules and safety requirements for
systems and their components
EN ISO 4254-1:2015 Agricultural machinery - Safety - Part 1: Common safety
requirements
EN ISO 4254-10:2010 Agricultural machinery - Safety - Part 10: Rakes and Hay tedder
ISO 11684: Tractors, machinery for agriculture and forestry, powered lawn and garden
equipment - Safety signs and hazard pictorials - General principles (1995)
EN 12100:2010 Safety of Machinery - General principles of design - Risk assessment
and risk reduction
EN 12965:2020 Tractors and machinery for agriculture and forestry. Power take-off
(PTO) drive shafts and their guards.
EN 13857:2020 Safety of machinery - Safety distances to prevent hazard zones being
reached by lower limbs
ISO 3600:2015 Tractors and machinery for agriculture and forestry, lawn and garden
motor equipment - Content and presentation.
All rights reserved. The reproduction of any part of this manual, in any form, without the
explicit written authorisation by ENOROSSI is forbidden. The content of this manual can
only be modified by the manufacturing company and without prior notice to the
Customer.
EC DECLARATION OF CONFORMITY
(Att.IIA Machinery Directive EC/2006/42)
The Manufacturer ENOAGRICOLA ROSSI s.r.l.
with office in via Cortonese, 36 - 06019
Calzolaro di Umbertide (PG) - Italy
declares under its responsibility that the machine
which functions are described in this manual
is conform with the essential Health and Safety Protection requisites of which in
Machinery Directive 2006/42/CE. To verify Conformity of the above Directives,
the following EN Harmonised Standards have been consulted:
EN 13854:2020 - EN 4413 :2012
EN ISO 4254-1:2015 - EN ISO 4254-10:2010 - ISO 11684 (1995)
EN 12100:2010 - EN ISO 12965:2020
EN ISO 13857:2020 - ISO 3600:2015
And authorises Enorossi
Via Cortonese, 36 - 06019 Calzolaro di Umbertide (PG) - Italy
to constitute the Technical File on its behalf
GIOVANNINI ADELMO
Calzolaro di Umbertide, …….. ….……………………….
Legal representative
To Next Page
Loading...
