enorossi RT7 - E6 Machine Demolition: Disposal of Materials

Use and maintenance manual
MAINTENANCE - 25
E6 Machine demolition: disposal of materials
When the rake is placed out of service, you must make harmless all parts that could pose a safety risk to persons, animals and the environment when sent for
disposal. Materials that make up the rake and should be set aside for segregated disposal are:
- Iron
- steel
- Hydraulic oil
- Rubber
- Plastics
These materials must be disposed of in compliance with relative national legislation in force.
Rapid wear of windrow teeth
Teeth are constantly touching the ground
Adjust hay wheels weight (See paragraph D3)
oil overheating
clogged filter
tubes crushed
lack of oil
Change filter
Check and change pipes
Add oil
leak of oil
slow connection
worn seals
Tighten the pipe
Replace the seal
Note: for failures or inconveniences that are not reported in the table, please contact the Manufacturer.