Use and maintenance manual
8 - INTRODUCTION
• in case of late signaling of the manufacturing defects;
• in case of accidents or fortuitous cases of force majeure.
The warranty becomes void in case:
• the rake is used by inadequately trained personnel;
• the indications and/or regulations in these instructions have not been followed or complied with;
• the envisioned maintenance interventions have not been carried out;
• the Customer makes modifications to the rake without the written authorization by the Manufacturer or the same tampers with the components;
• non-original spare parts are used or non-conform with those recommended by the Manufacturer.
However, the warranty period recognized for the rake is not valid for all components not manufactured by the Manufacturer and for which that reported in the
relative purchase notes remains valid.
IMPORTANT
The Manufacturer does not guarantee conformity of the rake with the legal dispositions in force and, in particular, with those relating to accident prevention and
pollution in the non-E.U. countries. The adjustment of the hay rake to the respective regulations will be the full responsibility and at the expense of the
Customer. The Manufacturer is lifted from every responsibility if the compliance with the same regulations should give rise to controversies or cause any type of
damage.